I also dabbled in the past with time lapse videos, however this was a more manual process with images capturing to a folder, then personally loading them into Windows Movie Maker to create the video. With the tedium of creating the videos, the software I used for capturing (YAWCam) would hang after a few weeks constant running, not to mention without upkeep, the hundreds of thousands of image files populating the hard drive.

As a project it was time to combine the learnings from these and create an automated time lapse video creator, a program that would capture images, then create a 5-minute video that contains the days’ footage, and finish by deleting the temporary images to leave just the days video.

As with the CCTV project, a batch file will be used to create the process as what I need can be achieved by DOS commands plus it’s able to be called by Windows Task Scheduler. This time I will have the advantage of using an IP camera instead of USB, so negating the need for software to capture images, however the WGet utility is needed to download and save the images locally. Also the script will invoke FFMpeg to convert the images to video at the end of the day.

Setup

Getting started, place the WGet utility in the System32 folder so it can be called from dos without specifying a path. Then create this folder hierarchy on the root of C:\ drive:

Here’s the code for capture.bat, I placed this in the Data folder with ffmpeg.exe for neatness:

@echo off
::SET DATE TO A VARIABLE
set todaydate=%date:~-4%-%date:~3,2%-%date:~0,2%
::RESET COUNTER TO ZERO
set counter=100000

::CREATE TODAYS FOLDER AND NAVIGATE TO IT
echo Creating Folder…
c:
cd \cam\Data\temp\
md %todaydate%
cd %todaydate%
::LOOP START
echo Capturing Images…
:capture
::GET IMAGE FROM WEBCAM CGI
wget -q http://xxx.xxx.xxx.xxx/image/jpeg.cgi

::RENAME FILE USING COUNTER
ren jpeg.cgi image%counter%.jpg

::INCREMENT COUNTER BY ONE
set /a counter=counter+1

::SET TIME TO VARIABLE
set hour=%time:~0,2%
if “%hour:~0,1%” == ” ” set hour=0%hour:~1,1%
set min=%time:~3,2%
if “%min:~0,1%” == ” ” set min=0%min:~1,1%
set secs=%time:~6,2%
if “%secs:~0,1%” == ” ” set secs=0%secs:~1,1%
set thetime=%hour%%min%%secs%

::TIME BEFORE NEXT IMAGE
timeout /t 3 >nul

::CHECK ITS NOT END OF DAY
if %thetime% LSS 120600 (
goto capture
) else (
::START CONVERTING VIDEO
echo Processing Timelapse Video…
“C:\cam\Data\ffmpeg.exe” -loglevel quiet -i C:\cam\Data\temp\%todaydate%\image1%%05d.jpg -r 28 -c:v libx264 C:\cam\Video\%todaydate%.mp4
echo Deleting temp files…
::TIME DELAY TO ALLOW PROCESS TO CLOSE
timeout /t 10 >nul
::CHANGE DIRECTORY OUT OF FOLDER TO BE DELETED THEN DELETE TEMP FILE
cd \cam\Data\temp\
RD /S /Q “C:\cam\Data\temp\%todaydate%”
)
echo Process Complete

Next is to create a Scheduled Task in Windows to launch the program each day at midnight, this process varies by system but ensure that user privileges are high enough to write and execute on disk.

I found Windows Server 2012 R2 had a lot more options over Server 2003, so I set the task to run when even when not logged on, to run hidden, and now the time can be specified to the second, so chose to start task at 00:00:03 to make sure the date is correct.

Notes

Hopefully the annotation will be helpful enough if you would like to apply your own tweaks, but here are some of notes about the issues I faced when creating the script:

• Originally the images named with a timestamp, however FFMpeg requires images to be sequentially numbered to create the slideshow.
• The counter was set at 000000, but on the first loop the arithmetic to increase the counter changed the value to 1, so lines were added to include the leading zeros
• The leading zeros meant that the machine was reading the number as an octet, so on the 8^th loop the counter reset to 000001, as a workaround a leading 1 was added to the counter.
• Capturing images every 10 seconds equates to 8640 images a day, the counter it set to five decimals to ensure no looping of counter numbers.
• In addition to storing the date as a variable to allow multiple calls, it allows the program to keep the same date after time moves into the next day. Since the video conversion starts at 23:59 each day its very likely the process will move into the next day when temp files are deleted.
• Initially the time variables were inside the IF statement, but learned that the variable with an IF statement are created when the program is parsed, not run, therefore would not update.
• However, the time needs to be in the loop to update before the IF statement is reached, the date is purposely kept out to it retains the value set at the start of the script.
• While statements don’t really exist in batch files, so goto and If commands were used to create a crude while loop.

I dare not say that the code is perfect, or if the choice of programming language is suitable, the aspiration would be to create a self contained executable with a configuration file to specify target folders, change finish time and time between image captures. But for now it’s doing the job just fine.

Update

Since creating the program I’ve reused parts of the code to create a preview program that compiles the images taken so far that day into a video, without deleting any files. Here’s the code, again, save as a bat file and double click to run immediately.

@echo off

echo Establishing todays date…
::FIND TODAYS DATE TO ESTABLISH FOLDER NAME
set todaydate=%date:~-4%-%date:~3,2%-%date:~0,2%

::FIND TIME TO CREATE FILENAME VARIABLE
set hour=%time:~0,2%
if “%hour:~0,1%” == ” ” set hour=0%hour:~1,1%
set min=%time:~3,2%
if “%min:~0,1%” == ” ” set min=0%min:~1,1%
set secs=%time:~6,2%
if “%secs:~0,1%” == ” ” set secs=0%secs:~1,1%
set thetime=%hour%%min%%secs%

echo Locating temp files…
::NAVIGATE TO IMAGE FOLDER
C:
cd \cam\Data\temp\
cd %todaydate%

echo Creating preview video
::CREATE VIDEO AND ADD PREVIEW IN FILENAME TO AVOID DUPLICATE FILENAMES
“C:\cam\Data\ffmpeg.exe” -loglevel quiet -i C:\cam\Data\temp\%todaydate%\image1%%05d.jpg -r 28 -c:v libx264 V:\Timelapse\Video\preview-%todaydate%-%thetime%.mp4

echo Complete

Many newer IP cameras, including my Trendnet TV-IP572W comes equipped with a microSD slot for recording on a rotating basis. However, this has two main caveats, firstly the investment in a microSD card to be used solely for this purpose and of a high enough capacity to record enough footage, especially with the introduction of HD capture. Secondly is accessing the footage, as it is effectively held on the IP camera it is the gateway to the data. In my experience this process is slow, with having to download each video file manually and slow transfer speeds.

Imagine wanting to view an event that could have happened over a span of a few hours, and with video captured in segments of 5 minutes at most, the whole process can become tedious very quickly.

Therefore, I came up with another solution, one that uses my server’s hard disks for video storage to save on money while allowing larger video retention than a micro SD card. Also the ability to automatically delete older files to make way for new. This method uses Samba settings of an IP camera to save video to a Windows Server, and on the server itself, employing Disk Quota management to effectively trick the camera into thinking it only has a certain amount of disk space, to allow the cyclic video retention and prevent the footage taking up a whole drive on the server.

The benefit of employing Disk Quota management is that many cameras can record to the same volume or drive without fighting over space, plus with careful space management the days’ retention per camera can be manipulated. For instance an outdoor facing camera can be allocated more data and therefore more footage to search for suspicious activity, while an indoor camera can be set to record just a day’s footage in case of break ins.

Here’s how…

The heart of this system is to assign a user account per camera; this gives the ability to manipulate data capacity for each feed.

On the server

Open up Computer Management, on newer systems this is found by right clicking the Windows icon.

In System Tools, Local Users and Groups, right click Users and select New user.

Enter the details in the new user field, ensuring to check User cannot change password and Password never expires. Then click Create.

Next, on the drive of the video storage, right click and choose Properties, then choose the Quota tab.

Enable quota management by clicking the Enable quota management checkbox, and check the Deny disk space to users exceeding limit.

Then click on Quota Entries, then the new entry button .

Time for the drawn out Windows user selection, click Advanced, on the next window click Find now, then choose the newly created cctv account, then OK and OK to bring up the Add New Quota Entry.

Set the disk limit for this user, this is the maximum the camera will store on the drive, you can specify a warning level but most IP Camera will ignore this setting. On clicking OK the user will appear in the Quota Entries Windows, this window can then be closed.

Click OK on the drive properties window and acknowledge the warning, Disk Quota will be active.

On the Camera

Setting the camera up can vary drastically on the model, in the setup menu the recording menu needs to be found.

In the example of the Trendnet TV-IP572W, in the setup menu, choose Action then click the Recording checkbox to open the settings dialog.

Dependant on the camera settings, look for an option to save to a remote machine/server, or in this case a Samba share.

Use the credentials added to the Quota Management, and if available choose the Cyclic / Loop option so the camera manages deletion of the oldest files.

Review

Finally it’s time to wait for the quota to fill, and then check to see if the older data is being deleted automatically. For a more in depth review open the Quota Entries window, the camera will use the maximum available so will always be triggering the warning status, but this means that the maximum amount of data is available for review.