# THIS FILE NEEDS TO BE CALLED SIPDefault.cnf 
# SIP Generic Configuration File For CISCO 7940 (start)

# Image Version 
image_version: "P0S3-8-12-00" ; SIP Version 8.6

# Proxy Server info
proxy1_address: "192.168.1.1" ;SIP server address 
proxy1_port: "5060" ; Proxy Server Port (default - 5060)
proxy_register : 1

# Outbound Proxy info 
outbound_proxy: "" 
outbound_proxy_port: ""

# Emergency Proxy info 
proxy_emergency: "" 
proxy_emergency_port: "" 

# Backup Proxy info 
proxy_backup: "" 
proxy_backup_port: "" 

# NAT/Firewall Traversal 
nat_enable: "0" 
nat_address: "192.168.1.1"
nat_received_processing: "1" 
voip_control_port: "5065" 
start_media_port: "16384" 
end_media_port: "32766" 

# Phone Registration Expiration [1-3932100 sec] (Default - 3600) 
timer_register_expires: "60" 

# Codec for media stream (g711ulaw (default), g711alaw, g729) 
preferred_codec: "g711alaw" ; European high quality codec providing CD quality (64kb)

# TOS bits in media stream [0-5] (Default - 5) 
tos_media: "5" 

# Enable VAD (0-disable (default), 1-enable) 
enable_vad: "0" 

# Allow for the bridge on a 3way call to join remaining parties upon hangup 
cnf_join_enable: "1" ; 0-Disabled, 1-Enabled (default) 

# Allow Transfer to be completed while target phone is still ringing 
semi_attended_transfer: "0" ; 0-Disabled, 1-Enabled (default) 

# Inband DTMF Settings (0-disable, 1-enable (default)) 
dtmf_inband: "1" 

# Out of band DTMF Settings (none-disable, avt-avt enable (default), avt_always - always avt ) 
dtmf_outofband: "avt" 

# DTMF dB Level Settings (1-6dB down, 2-3db down, 3-nominal (default), 4-3db up, 5-6dB up) 
dtmf_db_level: "3" 

# SIP Timers 
timer_t1: "500" ; Default 500 msec 
timer_t2: "4000" ; Default 4 sec 
sip_retx: "10" ; Default 11 
sip_invite_retx: "6" ; Default 7 
timer_invite_expires: "180" ; Default 180 sec 

# TFTP Phone Specific Configuration File Directory 
;tftp_cfg_dir: "" 

# Time Server 
sntp_mode: "unicast" 
sntp_server: "ntp0.uk.uu.net" ; SNTP Server Cambridge UK

#Time Format
time_format_24hr: "1" ; Enable(1 - 24Hr Default)/Disable(0 - 12Hr) 

# Daylight Savings Settings (UK)
dst_offset: 1 ; Offset from Phone's time when DST is in effect 
dst_start_month: March ; Month in which DST starts 
dst_start_day: "25" ; Day of month in which DST starts 
dst_start_day_of_week: Sunday ; Day of week in which DST starts 
dst_start_week_of_month: 1 ; Week of month in which DST starts 
dst_start_time: 1 ; Time of day in which DST starts 
dst_stop_month: October ; Month in which DST stops 
dst_stop_day: "28" ; Day of month in which DST stops 
dst_stop_day_of_week: Sunday ; Day of week in which DST stops 
dst_stop_week_of_month: 8 ; Week of month in which DST stops 8=last week of month 
dst_stop_time: 2 ; Time of day in which DST stops 
dst_auto_adjust: 1 ; Enable(1-Default)/Disable(0) DST automatic adjustment 

# Do Not Disturb Control
dnd_control: "0" ; (0-off, 1-on, 2-off with no user control, 3-on with no user control)

# Caller ID Blocking (0-disabled, 1-enabled, 2-disabled no user control, 3-enabled no user control) 
callerid_blocking: "0" ; Default 0 (Disable sending all calls as anonymous) 

# Anonymous Call Blocking (0-disbaled, 1-enabled, 2-disabled no user control, 3-enabled no user control) 
anonymous_call_block: "0" ; Default 0 (Disable blocking of anonymous calls) 

# Call Waiting (0-disabled, 1-enabled, 2-disabled with no user control, 3-enabled with no user control) 
call_waiting: "1" ; Default 1 (Call Waiting enabled) 

# DTMF AVT Payload (Dynamic payload range for AVT tones - 96-127) 
dtmf_avt_payload: "101" ; Default 100 

# XML file that specifies the dialplan desired 
dial_template: "dialplan" 

# Network Media Type (auto, full100, full10, half100, half10) 
network_media_type: "auto" 

#Autocompletion During Dial (0-off, 1-on [default]) 
autocomplete: "0" 

# URL for external Phone Services
services_url: "" ; News Feed Services

# URL for external Directory location 
directory_url: "http://192.168.1.1/directory.xml" ; Phone Directory

# URL for branding logo 
logo_url: "http://192.168.1.1/image.bmp" ; Desktop Logo file

# Remote Party ID 
remote_party_id: 1 ; 0-Disabled (default), 1-Enabled 

# SIP Generic Configuration File For CISCO 7940 (end)