Useful I.T. & VoIP Ramblings
With the cooler outdoor temperatures, a bug in my original code for the temperature display has cropped up:
The DS18B20 returns temperatures with up to three decimal places, with the decimal point omitted, therefore a temperature of 10oC would be shown as 10000 by the sensor. To deal with this and for the display to show the temp to one decimal, I used this code:
Nothing grand to start with, but as a first project I thought to combine a 20×4 LCD display with two DS18B20 temperature sensors to monitor indoor and outdoor temperatures. This would replace a cheap display I had been using but was sceptical on its accuracy.
Getting the basics right involved making the device blend in to the current setup without the usual mass of wires protrude. From the last round of the seam ably endless cable management war I used a shoebox base as a stand for the webserver and network switch, with the box hiding the various power bricks and extra cable, with most coming from the Xbox 360. Still having the shoebox lid I thought it would be good to use as a modular part to house the Pi and display.
